Cardo Systems SCALA RIDER Guide D'utilisateur page 3

Audio and Corded Microphone User Guide
There are two methods that can be used in order to attach the Clamp
onto the helmet:
Standard Method: Recommended for most helmet types.
Glue Plate Method: Recommended for helmets to
which the standard method cannot be applied, using
the Glue Plate included in the box.
Standard Method
1. Use the enclosed Allen Wrench to loosen the two
screws on the Back Plate.
2. Slide the Back Plate between the internal padding
and the external shell of the helmet.
3. Use the pre-moistened towelette to clean the
exact spot on the internal padding of the helmet,
opposite your mouth, where the microphone will
be placed.
QG Corded Microphone_011 QG0156.indd 3
4. Peel the foil cover from the adhesive Velcro pad and place the Velcro
pad on the chosen location opposite your mouth.
5. Attach the microphone on the Velcro, as in photo.
6. Tighten the screws of the Clamp.
Glue Plate Method
You have the option to glue the Helmet Clamp onto your helmet, when
the above standard method cannot be used, or in case you prefer to
secure the Helmet Clamp with adhesive glue. This option has been suc-
cessfully used for a range of high end helmets.
NOTE: While we have no reason to believe that the gluing option might negatively
affect any helmet, Cardo does not assume any responsibility to that affect, irrespective
of its nature and circumstances. The Glue Plate is offered as a free option that you may
choose to use at your own risk and subject to renouncement of any future claims.
3
2/9/09 6:49:23 PM