Assigning Names To The Sources - JVC KD-SX980 Manuel D'instructions

Note:
For connecting the Line Input Adaptor KS-U57 and the
external component, refer to the Installation/Connection
Manual (separate volume).
To adjust the auxiliary input level –
Adjust the auxiliary input level properly when an
external component is connected to the MP3 INPUT
jack.
When shipped from the factory, the auxiliary input
level is set at level "00."
If the input level of the connected component is not
high enough, increase the input level properly.
Without adjusting the line input level, you may be
surprised at a loud sound when you change the
source from the external component to another
source.
To turn the tag display on or off
An MP3 file can contain file information called
"ID3 Tag" where its album name, performer, track
title, etc. are recorded.
There are two versions–ID3v1 (ID3 Tag version 1)
and ID3v2 (ID3 Tag version 2). This unit is
compatible only with ID3v1.
When shipped from the factory, "TAG ON" is
selected.
• TAG ON: Turns on the ID3 tag display while
playing MP3 files.
• If an MP3 file does not have ID3
tags, directory name and file
name appear.
Note:
If you change the setting from "TAG
OFF" to "TAG ON" while playing an
MP3 file, the tag display will be
activated when the next file starts
playing.
• TAG OFF: Turns off the ID3 tag display while
playing MP3 files. (Only the
directory name and file name can
be shown.)

Assigning names to the sources

You can assign names to station frequencies and
discs (both in this unit and in the CD changer).
After assigning a name, it will appear on the display
when you select the source.
AUX ADJ
Sources
Station frequencies
CDs*
* You cannot assign a name to a CD Text or an MP3
disc.
1
– TAG DISP
Select a source you want to assign a
name to.
2
Press and hold SEL (select) for more
than 2 seconds while pressing DISP
(display).
Maximum number of
characters
up to 8 characters (up to
30 station frequencies
including both FM and AM)
up to 32 characters
(up to 40 discs)
When you select a source,
the power automatically
comes on.
Ex.: When you select CD as the source
CONTINUED ON THE NEXT PAGE
27