Sportec 22517 Manuel page 8

INSTALLATION
Important instructions:
Before starting the assembly, first read through all the steps carefully.
PREPARATORY WORK
Unpack all parts and lay them out clearly on the floor.
First, check the condition and completeness of all parts. Never use parts that have already been dama-
ged. Contact us in the event of damage or incompleteness.
Set up the side panels
Place the side parts ❷ next to each other on the floor so that
you can safely place the shelves on them. The short legs point
towards you.
Connect parts together
Insert the screws ❹ through the holes in the shelves ❸ and
the side panels ❷. Connect the parts with the washers ❺, lock
washers ❻ and nuts ❼ as shown.
8
❹
❺
❻
❼
Sport-Tec GmbH ∙ Physio & Fitness ∙ www.sport-tec.de
Place the shelf
Place one of the storage surfaces ❸ on the side parts ❷ so that
the holes are on top of each other. The open side of the shelf
points in the direction of the short legs.
Last step
Repeat the last two steps with the second shelf ❸.
After all parts have been assembled, please check that all screws
and nuts are tightened. Make sure the stand is straight and
secure.