Publicité
Les langues disponibles
Les langues disponibles
Procedure for concatenation
1. Remove protective caps (1) and fold out the connector
[Fig. 1].
2. Fold out the connecting pieces (2) and push the elements
together. The connecting pieces must engage in the corres-
ponding retainers [Fig. 2+3].
4
1
(1)
3
5
(4)
3. Using the supplied Allen key WAF 7 (3), lock the elements
to each other through the opening in the upholstery (turn
counterclockwise!) [Fig. 4].
4. Disassembly is performed in reverse sequence.
5. In the event of floor unevenness release the screws with
an Allen key WAF 5. Adjust the levelling wedgesile (4) (off-
set) and screw again. (At maximum adjustment the screws
must be twisted out completely). [Fig. 5+6]
2
(2)
4
(3)
6
(4)
Publicité
