Publicité
Les langues disponibles
Les langues disponibles
Screw
2
4
Tighten with wrench firmly
Drawer door handle assembly
2
8_ setting up
DA68-02601B-14.indb 8
1
3
Fix the handles to the doors
by sliding them down firmly.
5
Check the direction of
Handle assembly.
1
Fix the handles to the
doors by sliding them
side firmly.
3
Fix the handles to the doors by sliding them left
side firmly.
4
5
Tilt up the Handle bar and tighten with wrench firmly.
Disassembling the refrigerator doors
Be careful not to drop and scratch the
doors while removing them.
WARNING
With the door opened
1. Remove the 3 screws holding down the TOP
TABLE ( 1 ) and turn it with wires connected.
1
2. Disconnect two connecto r ( 2 ) on the left side
door. To remove the water coupler from the
hinge, twist and pull it from the hinge.
2
2018. 10. 8. 오후 5:04
Publicité
