Télécharger Imprimer la page

Saneo JHS-A016-09KR2/D Mode D'emploi page 33

9000 btu

Publicité

Les langues disponibles

Les langues disponibles

-
The flat end of the drain pipe connections must be clipped into place.
-
Do not twist or block the drain pipe.
-
The length of the drain pipe is 280mm at most and can extend to 1500mm. Do not use extension cords or other
replacement hoses as this may cause malfunction. The drain pipe must not be blocked, otherwise it may cause
overheating.
Water drainage
1) When the air conditioner stops when the tank is full, turn it off and disconnect the plug.
Caution - Please move the unit carefully so as not to spill the water into the water tray at the bottom of the unit.
2) Place a container under the side water outlet behind the air conditioner.
3) Unscrew the drain cover and remove the water plug, the water will automatically flow into the container.
MAINTENANCE
1. Before cleaning, unplug the unit.
2. Do not use chemicals to clean the unit.
3. Never clean the unit directly under water or any other liquid.
4. If the unit is damaged, please contact a competent repairer.
3. Air filter
The filter must be cleaned every 2 weeks in order to remove dirt and dust:
-
d. Open the air inlet grille and remove the filter.
e. Clean the filter with detergent in lukewarm water and leave it to dry.
f. Once the filter is dry, put it back into the grille.
4. Cleaning the outer part of the air conditioner
Clean the surface of the appliance with detergent and a damp cloth. Then, dry the appliance
-
with a dry cloth.
Never clean the appliance with chemical products.
-
33

Publicité

loading

Ce manuel est également adapté pour:

001983