Publicité
Les langues disponibles
Les langues disponibles
1. Press the
2. Press the
3. Press the
button to lower the temperature.
4. Press the
5. Press the
6. Press the
7. Press the
INSTALLATION
It is important that the instructions below are respected to successfully install this portable air conditioner. If you have any
difficulties or questions regarding these installation procedures, please contact the customer service department.
Before installation:
IMPORTANT – before installing and operating the air conditioner, keep the unit upright for at least 2 hours.
Installation of the drain pipe
- Insert the drain pipe (the end of the drain joint ) into the ventilation slot on the rear panel (push to the left, as shown in
the diagram below)
Installation of the window kit
-
Open the window halfway and install the window kit as shown in the diagrams below. The kit can be installed
horizontally or vertically.
button to turn the appliance on or off.
button to set the timer.
button to choose one of the following functions: cooling, fan or dehumidifier.
button to increase the temperature.
button to select the wind speed.
button to activate the standby mode.
32
Publicité
