Axis Communications AXIS T98A-VE Serie Guide D'installation page 15

AXIS T98A-VE Series Installation Guide
Install an Axis Network Camera (sold separately)
1. If applicable, route the required cables through the camera bracket.
2. Route the required cables trough the supplied cable gaskets. See Connect the Cables, on page
13 for instructions on how to prepare a cable with a gasket.
3. Attach the cable gaskets to the cable holes in the cabinet door.
4. Connect the cables between the camera and the devices as required.
5. If available, use the safety wire to prevent the camera from falling.
6. Attach the camera to the cabinet door or, if applicable, to the camera bracket. See the screw
torque guide on page 8.
For more information on how to install Axis network products, please refer to the Installation Guide
supplied with the product or available from www.axis.com
Attach the Sunshield (sold separately)
Attach the sunshield (sold separately) according to the supplied
instructions. The sunshield protects the cabinet from sunlight and
rain.
Page 15