What Is Virtual Barrier; Warning; Operation; How To Install Your Virtual Barrier - Multivet Virtual Barrier Guide De L'utilisateur

WHAT IS VIRTUAL BARRIER?

It is a simple apparatus created to keep your pets away from one or many areas in your house. For
example, Virtual Barrier prevents your pet (or pets) from reaching your bedroom, from
approaching the new sofa or the kitchen table. Although the transmitter is made to operate
indoors, you can also use it in a garage or a patio which is close to an accessible electrical outlet.

WARNING

In order to reduce the risk of an electric shock or damage to the transmitter, avoid placing the
transmitter on wet surfaces, in moist or humid areas, close to a swimming pool, a Jacuzzi, etc. To
prevent damaging the transmitter, do not expose to snow, rain or other sources of water.

OPERATION

The transmitter creates around itself a 360-degree electrical field with a modulation. You
can adjust the beam between 60 cm (2') and 3 m (10') with the button located on the transmitter.
The maximum range depends on the location of the transmitter and the surroundings. When the
animal (wearing the receiver collar) gets close to the protected area, it immediately hears a
warning signal which indicates that it is approaching the forbidden zone. After, if it continues to
advance in that zone, it receives a spray. This keeps it away from the forbidden zone. At that
moment the spraying stops.

HOW TO INSTALL YOUR VIRTUAL BARRIER

1. ATTACH THE RECEIVER TO YOUR ANIMAL
1st step:
The spray receiver collar (sold separately) comes with its own collar but if you wish, you can use
another collar with the spray receiver collar.
2nd step:
Place the collar correctly. Once the collar is correctly attached, you should be able to insert a
finger between the receiver and the skin of the dog.