Self Configuration - Cimbali S20 Manuel

SELF Configuration

Machines configured in Self mode lack direct access to the drop-down menu. Therefore, programming is accessed as follows:
1
Lack of drop-down menu.
4
The access key appears on the touch screen:
Insert the password and confirm with the green
icon .
2
Press the Sleep Mode button (8), located on the
rear of the panel:
8
5
Access to programming is confirmed by the
green symbol in the top right:
30 EN
3
The following screen is displayed on the touch
screen:
Push the icon.
6
To leave programming, press the green symbol
in the top right and then the red icon :