Timer; Stop&Go Function - GUTMANN 11T581I Mode D'emploi

Timer

The timer can be used simultaneously with all the heating zones, with different time settings (from
1 to 999 minutes) for each heating zone.
•
Setting and modification of the cooking time:
Action
Select the power level
Select the timer
Decrease the time
Increase the time
After a few seconds, the [ min ] display stops blinking.
The time is confirmed and the timer starts.
•
To stop the cooking time:
Action
Select the Timer
Stop the time
If several timers are activated, repeat the process.
•
Egg timer function:
Egg timer is an independent function. It stops as soon as a heating zone starts working.
When the hob is switched off, the timer continues until it has reached the selected time.
Action
Activate the hob
Select the Timer
Decrease the time
Increase the time
After a few seconds, the [ min ] display stops blinking.
The time is confirmed and the timer starts.
•
Automatic stop at the end of the cooking time:
As soon as the selected cooking time has finished, the timer display is blinking [ 000 ] and a
sound rings.
To stop the sound and the blinking, press the key [ - ] and [ + ].
Stop&Go function
This function stops temporarly any cooking activity and allows to restart with the same settings.
•
Start up/stop the stop&go function:
Action
Engage stop&go
Stop the stop&go
Control panel
slide on the "SLIDER"
Press simultaneously key [ - ] and [ + ] Timer display on
from the timer until the
desired display is on
Press key [ - ] from the timer
Press key [ + ] from the timer
Control panel
Press simultaneously key [ - ] and [ + ] Timer display on
from the timer until the
desired display is on
Press key [ - ] from the timer
Control panel
press display [0/I]
Press simultaneously key [ - ] and [ + ] [ 000 ]
from the timer
Press key [ - ] from the timer
Press key [ + ] from the timer
Control panel
press [ II ]
press [ II ]
Press on the animated "slider"
39
Display
[ 1 ] to [ 9 ]
[ 60 ] to 59, 58...
Time increase
Display
[ 000 ]
Display
[ 0 ]
[ 60 ] to 59, 58...
Time increase
Display
[ II ] and control light on
"Slider" is animated
previous settings