camry Premium CR 1168 Mode D'emploi page 5

36) again will repeat the entire content of the USB memory/SD card.
8. Before removing the USB memory/SD card from the port first turn off the player, or switch it to radio mode, turntable disc playback mode ('PHON')
or external device mode ('AUX').
You are able to play music files saved on a mobile telephone equipped with Bluetooth, for playback on the power socket radio.
1. Turn on the device, press „ FUNCTION" button to select Bluetooth mode. .
2. Activate the Bluetooth connection of the media playback device. The media playback device will now search for devices to which it can
connect.
3. The media playback device should now be receiving the device code CR 1168
4. Use the media playback device to connect to the radio. To do this, select CR 1168 on the media playback device.
USING A DEVICE CONNECTED THROUGH THE AUX IN UNIVERSAL ENTRY PORT:
1. Connect the external device to the player by the AUX IN port (14).
2. Switch the player to the AUX IN mode by pressing the FUNCTION button (5).
PLAYBACK OF VINYL DISCS
Prior to first use of the turntable, remove the turntable needle guard (23) and untie the knot protecting the turntable arm found next to the turntable
arm lock (20).
1. Release the arm lock (20) and set the device to the PHON mode by using the FUNCTION button (5, 35).
2. Place the disc on the turntable plate. If necessary, use the adapter (18).
3. Select the plate's rotational speed (the rotational speed depending on the type of disc) by using the switch (21).
4. By using the level (19) lift the turntable arm - this will activate the turning of the plate with the turntable disc. Gently slide the arm onto the track you
want to listen to. Lower the needle arm using the lever (19).
5. You can set the volume by turning the volume control knob (17) or using the buttons (40) on the remote control.
6. To stop playback of the disc, lift the turntable arm using the lever (19).
7. After completion of playback of the disc lift the turntable arm using the turntable lever (19). Move the arm over the lock (20) and lower it using the
lever (19).
8. To turn the AUTO-STOP function on or off use the AUTO-STOP switch (32).
RECORDING ONTO A USB DISC/SD CARD
1. Recording from the radio - place the USB disc/SD card in the appropriate port (42 or 30). Press the FUNCTION button (5, 35) to select the radio
mode. Using the BAND button (11) set the wavelength to AM or FM. Using the SKIP DOWN button (12, 39) and SKIP UP button (13, 40) tune to the
desired radio frequency. Press the REC/DEL button (8, 33). Within a few seconds the device will read the available USB/SD memory media. Using
the SKIP DOWN button (12, 39) and SKIP UP button (13, 40) select whether you want to record to the USB memory or the SD card. Confirm by
pressing the REC/DEL button (8, 33) again. After a few seconds the device will record to the selected portable memory (if only the USB memory or
the SD card is connected, the first press of the REC/DEL button will activate the recording function after a few seconds). The REC icon will flash
during recording. To stop recording press the STOP/BAND button (11, 38).
CAUTION: Activation of the process of recording from the radio will occur with a several-second delay. There may be interference/noise during radio
recording.
2. Recording from a vinyl disc - place the USB disc/SD card in the appropriate port (42 or 30). Press the FUNCTION button (5, 35) to select the
'PHON' mode. Place the vinyl disc on the plate and begin playback of the track you want to record by placing the turntable arm in the appropriate
spot. The remaining steps are identical to that of recording from the radio.
3. Recording from an external device (AUX mode) - place the USB disc/SD card in the appropriate port (42 or 30). Press the FUNCTION button (5,
35) to select the 'AUX' mode. Connect the external device to the AUX IN port (14) and select the track you wish to record from the external device.
The remaining steps are identical to that of recording from the radio.
DELETING TRACKS FROM A USB DISC/SD CARD
Deleting one recording - place the USB disc/SD card in the appropriate port (42 or 30). Select the track you want to delete using the SKIP DOWN
button (12, 39) and SKIP UP button (13, 40) and begin playing back. Press and hold the REC/DEL button (8, 33) for approximately 3 seconds.
SNOOZE FUNCTION
PRESS "SNOOZE"(43) BUTTON ON THE REMOTE CONTROL WHEN ALARM IN ACTIVE, ALARM WILL BE SiLENT FOR AROUND 9-10
MINUTES. AFTER 10-MINUTUE SNOOZE INTERVAL, ALARM WILL BE ACTIVE AGAIN. SNOOZE CAN BE USED FOR REPEATEDLY WITHIN
THE 1-HOUR ALARM ACTIVE INTERVAL.
CLEANING AND MAINTENANCE
1. Disconnect the device from the mains power.
2. The device may only be wiped with a dry cloth.
3. The device should be kept in a dry room.
CAUTION: Do not use water for cleaning - this may damage the device.
TECHNICAL DATA
Power source: 230V ~50Hz
RMS output power: 2x 1.5W
To protect your environment: please separate carton boxes and plastic bags and dispose them in corresponding waste bins.
Used appliance should be delivered to the dedicated collecting points due to hazarsous components, which may effect the
environment. Electrical appliance must be returned in order to reduce its reuse and utilization. If the device contains batteries
they should be delivered to dedicated points separatelly.
FM: 87,5-108 Mhz Bluetooth: 4.2V
5