Aqua Laser Air Cooler Mode D'emploi page 3

A. Indicator light
B. ON/OFF and FAN speed button
C. Front grill
D. Filter drawer handle
E. Water tank
F. Power port
G. Light button
TIPS
- Place the Air Cooler on a raised surface
such as a table, desk or counter top. This is
the best way to cool your personal area
faster.
- Let filter absorb water for at least 3
minutes after filling tank and before use.
Doing so will get you the coolest air quicker.
- Try to stay within a few feet of The Air Cooler. You'll feel the
most benefit when sitting directly in front.
SET UP
1. Place the Air Cooler on a flat surface.
2. Use the filter drawer handle (D) to pull out the filter drawer
and remove the filter.
3. Pre-soak the filter in water for the best results. For more cooling
power, place the wet filter in the freezer until frozen.
4. Open the water tank door and fill with water. We
recommend a pitcher or measuring cup.
5. Plug USB power adapter into an outlet. Then, insert
larger USB end of cable into the adapter and the smaller
end into the power port on the back of the Air Cooler.
NOTE: You can plug the larger USB end into a computer to
power the Air Cooler as well.
USAGE
1. Set the fan speed by pressing button(B). You can choose from High, Medium, Low Mode. The
indicator lights(A) next to the button shows you which speed the Air Cooler is currently running. 2.
Choose your light color by pressing the button(G). You can choose between solid colors or a color-
cycle mode.
3. When you're done, press the power button again to turn off your Air Cooler.