Würth SKIN LINE Traduction Des Instructions De Service D'origine page 10

Maintenance / care
Attention!
Risk of injuries or property damage due to
improper actions.
¾ Do not use any products with abrasive
ingredients.
Clean the dispenser housing with a slightly moist-
■
ened cloth.
Cleaning agents must be compatible with plastic
■
surfaces.
Do not use any products with abrasive ingredients.
■
Sticky product residues must be removed regularly.
■
Disinfecting the dispenser housing with appro-
■
priate surface disinfectant is possible.
Troubleshooting Tips
Information
If this device unexpectedly incurs a
fault, you can attempt to resolve the
problem using the tips outlined here.
No power supply:
Ensure that fresh batteries are inserted in the device.
Check the batteries used are inserted with the
■
correct polarity.
The device may not be fully closed.
■
10
Disposal
Electrical power tools, accessories
and packaging should be sorted
and submitted to an environmental-
ly-sound recycling facility.
Only for EU countries: Do not dis-
pose of your electrical power tool in
household waste. In accordance with the European
Directive 2012 / 19 / EU on Waste Electrical and
Electronic equipment and its implementation into
national law, electrical devices, that are no longer
usable, must be collected separately and disposed
of in an environment-friendly manner.
Batteries:
Do not dispose of batteries in household waste,
do not expose to fire or water. Collect and recy-
cle batteries or dispose of with due care for the
environment.
Only for EU countries: In accordance with Directive
2013 / 56 / EU defective or worn-out batteries
must be recycled.
Warranty
We provide a warranty for this Würth device from
the date of purchase and in accordance with the
legal/country-specific regulations (proof of purchase
through invoice or delivery note).
Damage that has occurred will be corrected either
by replacement or by repair. Damage caused by
improper handling is not covered by the warranty.
Claims under warranty can only be accepted if
the device is returned fully assembled to a Würth
agency, your Würth sales representative or an
authorised Würth customer service workshop.
Subject to technical changes without prior notice.
We accept no liability for printing errors.