Bionaire BAP600 Notice D'utilisation page 2

FITTING OF A PLUG - FOR U.K. AND IRELAND ONLY
If the plug is not suitable for the socket outlets in your home,
it can be removed and replaced by a plug of the correct
type.
If the fuse in a moulded plug needs to be changed, the fuse
cover must be refitted. The appliance must not be used
without the fuse cover fitted.
If the plug is unsuitable, it should be dismantled and
removed from the supply cord and an appropriate plug fitted
as detailed. If you remove the plug it must not be connected
to a 13 amp socket and the plug must be disposed of
immediately.
If any other plug is used, a 5 amp fuse must be fitted either
in the plug or adaptor or at the distributor board.
This symbol shows that this unit is a Class II
appliance so an earth connection is not required.
English
Français/French
Deutsch/German
Español/Spanish
Nederlands/Dutch
Svenska/Swedish
Suomi/Finnish
Dansk/Danish
Norsk/Norwegian
Polski/Polish
Ελληνικα/Greek
РУССКИЙ/Russian
Italiano/Italian
Magyar/Hungarian
Česky/Czech
Português/Portugese
2
6
11
16
21
26
30
35
40
44
49
54
59
64
69
73
Blue
(Neutral)
CORD
GRIP
Plug should be BS1363 approved
Fit a BS1362 approved 5 Amp Fuse
Do Not Connect
Mains Wires Here
5A
Fuse
Brown
(Live)