Operation - EarthWise 60418 Manuel De L'utilisateur

INSTALLING THE GRASS CATCHER
See figure 5
NOTE: When using the grass catcher, do not install either
the side discharge deflector or the mulching plug.

Lift the rear discharge door.

Lift the grass catcher by its handle and place under
the rear discharge door so that the hooks on the
grass catcher are seated on the hooks of the height
adjustment brackets.
SETTING BLADE HEIGHT
See figure 6
When shipped, the wheels on the mower are set to a
low-cutting position. Before using the mower for the first
time, adjust the cutting position to the height best suited for
your lawn. The average lawn should be between 1-1/2 in.
to 2 in. during the cool months and between 2 in. to 3 1/4
in. during the hot months.
HEIGHT
ADJUST
LEVER
WARNING:
Do not allow familiarity with this type of product to
make you careless. Remember that a careless frac-
tion of a second is sufficient to inflict serious injury.
WARNING:
Always wear safety goggles or safety glasses with
side shields when operating this product. Failure to do
so could result in objects being thrown into your eyes,
resulting in possible serious injury.
ASSEMBLY
To set the blade height:


GRASS CATCHER
HOOKS
DISCHARGE
HIGHEST
BLADE
SETTING
LOWEST
BLADE
SETTING
Fig. 6

OPERATION

Do not use any attachments or accessories not rec-
ommended by the manufacturer of this product. The
use of attachments or accessories not recommended
can result in serious personal injury.
APPLICATIONS:
You may use this product for the purpose listed below:

Page 11
To raise the blade height, grasp the height adjustment
lever and move it toward the back of the mower.
To lower the blade height, grasp the height adjustment
lever and move it toward the front of the mower.
HANDLE
REAR
DOOR
DOOR ROD
WARNING:
Mowing your lawn
Fig. 5