Disposal; Technical Data - MAXXMEE SDR-20JBE-3 Mode D'emploi

EN
The water pressure of the supply pipe is
too low.
►
The requirements for the water pres-
sure are listed in the "Technical Data"
chapter. These requirements should
be met to ensure the device works in
the optimum way.
The fuse in the fuse box has been
triggered.
Too many devices connected in one
circuit.
►
Reduce the number of connected
devices.
The circuit is not designed to handle the
power of the device.
►
Connect it to another circuit. The
requirements are listed in the "Tech-
nical Data" chapter.

TECHNICAL DATA

Article number:
Model number:
Rated voltage:
Power:
Protection class:
Type of protection:
Operating pressure:
Rated pressure:
Power connection:
Water temperature:
ID of assembly and
operating instructions: Z 04900 M BH V3 0322 md/uh
All rights reserved.
14
04900
SDR-20JBE-3
220 – 240 V ~ 50 / 60 Hz
3000 – 3600 W
I
IPX4
0.04 – 0.4 MPa (1.4 – 6 l/min)
0 MPa
Plug socket with a 16 A fuse
up to 60°C at the water inlet with a temperature of approx. 10°C

DISPOSAL

Dispose of the packaging material
in an environmentally friendly man-
ner so that it can be recycled.
The adjacent symbol (crossed-out
bin underlined) means that used
devices should not be disposed of
in the domestic waste, but should
instead be taken to special collec-
tion and return systems.
Owners of used devices from
private households can take them
free of charge to the collection
points of the public waste disposal
authorities or the disposal points
which are set up by manufacturers
and distributors under the Elec-
trical Equipment Act. Businesses
which market electrical and elec-
tronic devices are also obliged to
take back used devices.