Use - MAXXMEE SDR-20JBE-3 Mode D'emploi

EN
connection to the mains can quickly
be isolated.
■
Do not connect the device along with
other consumers with a high wattage
to a circuit in order to prevent over-
loading and a possible short circuit
(fire). Make sure that the circuit is
designed to handle the power of the
device.
■
Do not use any multiple sockets,
extension cables more than 3 m long
or cable extension reels.
■
The water pressure of the water
supply pipe must be within the limits
which are specified in the "Technical
Data" chapter.
■
Check the device, the connecting
cable and all accessories for damage
prior to installation. Use the device
only if all components are undamaged
and in working order.
We recommend connecting the water
inlet (10) of the device directly, or via
a quick coupling, to a tap, and not to
a hose. To ensure it works perfectly, you
should avoid using a power cable or wa-
ter supply pipe which is too long.
1. Fit the main device (1) on the water
supply connection (preferably a tap).
To do this, insert the medium sealing
ring (8) into the water inlet (10) and ...
a) ... screw this onto the water supply
connection,
b) ... with a ¾" thread (e.g. a quick
coupling) insert the large sealing
ring (9) into the ¾" adapter (3) and
screw this in between (Picture C),
c) ... with a ½" thread insert the small
sealing ring (7) into the ½" adapt-
er (2) and screw this in between
(Picture C),
d) ... with other water supply connec-
tions, in addition to the ½" adapt-
12
er (2) with the sealing ring, use
the universal adapter (5) and the
metal clamp (6) (Picture D). Screw
the universal adapter into the
½" adapter. Plug the other end
onto the water supply connection
and fix it in place with the metal
clamp (6) by twisting it tighter.
2. If a quick coupling is to be fitted on
the water outlet (14), unscrew the flow
regulator (13) and screw in the ¾"
plastic adapter. Screw a standard quick
coupling onto it.
Otherwise skip this step.
3. Open the water supply.
4. Turn the water regulator (11) of the
device to water flow (turn it down-
wards until you hear a click) and check
all connections for any leaks. Fix any
leaks.
5. Only if there are no leaks should
you plug the mains plug into the plug
socket.

USE

Picture E shows the possible positions of
the water regulator (11) and the corre-
sponding settings:
• If the water regulator is in the middle
position, the water flow is switched
off.
• When the water regulator is turned
downwards, the flow of cold water
increases.
• When it is turned upwards, the flow
of hot water increases. The water
temperature drops as the amount of
water flowing in the hot water range
increases.
When the device is operated in the
hot water range, the display shows
the current water temperature.