Publicité
Les langues disponibles
Les langues disponibles
IMPORTANT
• "Car bassinet unit" (Group 0) must be fitted perpendicular
to the vehicle's normal direction of travel.
• Do not fit Car bassinet unit on vehicle seats that face away
or sideways with respect to the normal direction of travel
of the vehicle.
• The item is given a serial number.
WARNING
IMPORTANT: Read these instructions carefully and
store them in the holder provided throughout the
lifecycle of the product. The child's safety could be put
at risk if these instructions are not followed.
• It could be dangerous to leave your child unattended.
• Assembly and preparation of the item must be carried out
by adults.
• Do not use the product if there are missing or broken parts.
• Before use make sure that all of the attachment
mechanisms are connected properly.
• Do not insert fingers into the mechanisms.
• Do not use near heat sources, open flames or dangerous
objects that are within reach of the child.
• It could be dangerous to use accessories which are not
approved by the manufacturer.
• Make sure the belts fastening the Car bassinet unit to the
vehicle are always taut and adjust the straps securing the
child.
• Never twist the belts.
• Replace the item if it undergoes significant strain in an
accident or shows clear signs of breakage or deformation.
• The safety device should not be modified by users in any
circumstances.
• Do not use in vehicles with the backrest in the raised
position.
• Carefully follow the instructions supplied by the
manufacturer of the child restraint system.
• Never leave a child alone and unsupervised in a car, not
even for a short time. The temperature inside the vehicle
can change rapidly and become dangerous for the child
inside.
• If using a second-hand product, make sure it is a recent
model, comes with instructions, and is fully functional in
all parts. An obsolete product may not conform to safety
standards, due to natural ageing of materials and updating
of regulations. If you have any doubts, contact the
manufacturer's customer service centre.
• Do not remove or change the white polystyrene part to
the sides of the bassinet as this is an important safety
element.
• Do not use the Culla Primonido if it has broken or missing
parts or if it has been subjected to violent stress in an
accident, as it may have suffered structural damage that is
not visible yet extremely dangerous.
• The Car bassinet unit must always be secured with the
vehicle's safety belts, even when the child is not present. In
the event of sudden braking, it could injure the occupants
of the vehicle.
• When travelling in vehicles, never hold the child in your
arms and never put him/her anywhere but in the Car
bassinet unit. In the event of sudden braking, even at low
speeds, the child would be flung forward.
• Take particular care to make sure that luggage or other
objects are not located where they may injure the child in
the Car bassinet unit in the event of an accident.
• Do not leave the Car bassinet unit in vehicles exposed to
the sun. Some parts might heat up and be harmful to the
delicate skin of the child – check before placing the child
in the seat.
• Make sure that the Car bassinet unit is not obstructed by any
moving parts of the vehicle's seat or by one of the doors.
• Do not use the Car bassinet unit without its fabric covering,
which cannot be replaced with one not approved by the
manufacturer since it is an integral part of the Car bassinet
unit and the safety system. If replacing it, use an official
spare part.
• Culla Primonido was designed for use with the polystyrene
shock absorber supplied with the "CULLA Primonido CAR
KIT". For correct installation, follow the instructions in this
user manual.
WARNING: do not remove when the Culla Primonido is
being used in the car.
• Take care when adjusting the mechanisms (handle,
backrest) with the child present.
25
Publicité
