JVC KD-SR61 Manuel D'instructions page 7

RADIO
"ST" lights up when receiving an FM stereo broadcast with sufficient
signal strength.
Search for a station
1
Press repeatedly to select FM or AM.
2
Press (or press
automatically.
(or)
Press and hold (or press and hold
"M" flashes, then press repeatedly to search for a station manually.
Settings in memory
You can store up to 18 stations for FM and 6 stations for AM.
Store a station
While listening to a station....
Press and hold one of the number buttons (1 to 6).
(or)
1 Press and hold the volume knob until "PRESET MODE" flashes.
2 Turn the volume knob to select a preset number, then press the
knob.
The preset number flashes and "MEMORY" appears.
on RM-RK52) to search for a station
on RM-RK52) until
Select a stored station
Press one of the number buttons (1 to 6).
(or)
1
Press .
2
Turn the volume knob to select a preset number, then press the
knob to confirm.
Other settings
1 Press and hold
2 Turn the volume knob to select [TUNER], then press the knob.
3 Turn the volume knob to make a selection (see the following table),
then press the knob.
4 Repeat step 3 until the desired item is selected/activated or follow
the instructions stated on the selected item.
5
Press to exit.
To return to the previous setting item, press
RADIO TIMER Turns on the radio at a specific time regardless of the current source.
1 ONCE/ DAILY/ WEEKLY/ OFF: Select how often the timer will be
turned on.
2 FM/ AM: Select the FM or AM band.
3 01 to 18 (for FM)/ 01 to 06 (for AM): Select the preset station.
4 Set the activation day * and time.
"M" lights up when complete.
Radio Timer will not activate for the following cases.
• The unit is turned off.
• [OFF] is selected for [AM] in [SRC SELECT] after Radio Timer for AM is
selected. ( 4)
* Selectable only when [ONCE] or [WEEKLY] is selected in step
.
.
1
.
ENGLISH
Default: XX
7