Eu Declaration Of Conformity - MAGNAFLUX EV6000 Manuel D'utilisation

EU DECLARATION OF CONFORMITY

In accordance with EN ISO 17050-1:2010
Object of the declaration:
Product: LED UV Lamp
Model/type: EV6000 / EV6500
Manufacturer: Magnaflux
Address: 155 Harlem Avenue, Glenview, IL 60025, USA
This declaration is issued under the sole responsibility of the manufacturer.
The object of the declaration described above is in conformity with the relevant Union
harmonisation legislation:
2014/35/EU The Low Voltage Directive
2014/30/EU The Electromagnetic Compatibility Directive
2011/65/EU The Restriction of Hazardous Substances Directive
Conformity is shown by compliance with the applicable requirements of the following documents:
Reference & Date Title
EN61010-
Safety requirements for electrical equipment for measurement, control,
and laboratory use - Part 1: General requirements
1:2010+A1:2019
Electrical equipment for measurement, control and laboratory use - EMC
IEC 61326-1:2020
requirements - Part 1: General requirements
Non-destructive testing - Penetrant testing and magnetic particle testing
EN ISO 3059:2012
- Viewing conditions
EN ISO 3452:1998 Non-destructive testing - Penetrant testing
EN ISO 9934:2015 Non-destructive testing - Magnetic particle testing
Signed for and
Magnaflux
on behalf of:
Place of issue: DeWitt, Iowa, United States of America
Date of issue: June 2016
Name: Mike Fryauf
Position: Engineering Manager
Signature:
EV6000 / EV6500 Operating Manual
7