Eu Declaration Of Conformity; Warranty; Support - MAGNAFLUX EV6000 Manuel D'utilisation

UKCA DECLARATION OF CONFORMITY
In accordance with EN ISO 17050-1:2010
Object of the declaration:
Product:
Model/type:
Manufacturer:
Address:
This declaration is issued under the sole responsibility of the manufacturer.
The object of the declaration described above is in conformity with the relevant Union
harmonisation legislation:
Electrical Equipment (Safety) Regulations 2016
Electromagnetic Compatibility Regulations 2016
The Restriction of the Use of Certain Hazardous Substances in Elec-
trical and Electronic Equipment Regulations 2012
Conformity is shown by compliance with the applicable requirements of the following documents:
Reference & Date Title
EN61010-
1:2010+A1:2019
IEC 61326-1:2020
EN ISO 3059:2012
EN ISO 3452:1998 Non-destructive testing - Penetrant testing
EN ISO 9934:2015 Non-destructive testing - Magnetic particle testing
Signed for and on
behalf of:
Place of issue:
Date of issue:
Name:
Position:
Signature:

WARRANTY

Refer to the Magnaflux Warranty Statement at www.magnaflux.com.

SUPPORT

If you have a question please contact Magnaflux at:
1-847-657-5300
support@magnaflux.com
www.magnaflux.com
You can also contact your local Distributor or Magnaflux Authorized Service Center directly;
contact information is available at www.magnaflux.com.
8
EV6000 / EV6500 Operating Manual
LED UV Lamp
EV6000 / EV6500
Magnaflux
155 Harlem Avenue, Glenview, IL 60025, USA
Safety requirements for electrical equipment for measurement, control,
and laboratory use - Part 1: General requirements
Electrical equipment for measurement, control and laboratory use - EMC
requirements - Part 1: General requirements
Non-destructive testing - Penetrant testing and magnetic particle testing
- Viewing conditions
Magnaflux
DeWitt, Iowa, United States of America
April 2021
Mike Fryauf
Engineering Manager