Publicité
Les langues disponibles
Les langues disponibles
202104
dangerous in the hands of untrained users.
e) Maintain power tools. Check for misalignment or binding of moving parts, breakage of
parts and any other condition that may affect the power tool's operation. If damaged,
have the power tool repaired before use. Many accidents are caused by poorly
maintained power tools.
f)
Keep cutting tools sharp and clean. Properly maintained cutting tools with sharp cutting
edges are less likely to bind and are easier to control.
g) Use the power tool, accessories and tool bits etc. in accordance with these
instructions, taking into account the working conditions and the work to be
performed. Use of the power tool for operations different from those intended could result
in a hazardous situation.
5. Service
a) Have your power tool serviced by a qualified repair person using only identical
replacement parts. This will ensure that the safety of the power tool is maintained.
4. OPERATION INSTRUCTIONS
NOTE: Before using the tool, read the instruction book carefully.
Intended Use
The machine is intended for dry sanding of wood, plastic, filler and coated surfaces.
1. FITTING THE SANDING PAPER
SANDING PAPER WITH HOOK & LOOP SYSTEM
FIT THE SANDING PAPER (See Fig A)
The sanding papers are placed directly onto the
base plate. The hole pattern in the base plate and
sanding paper must match. Then press the sanding
paper onto the base plate by hand. Firmly press
the power tool with the sanding paper against a
flat surface and briefly switch the power tool on.
This provides for good adhesion and prevents
premature wear.
Before placing on the sanding paper, free the base
plate from dust/debris by lightly tapping against it.
19
SAFETY AND OPERATING MANUAL
Publicité
