Charging The Battery; Troubleshooting; Warranty - CONTINENTAL EDISON CELED53HP20B4 Guide D'utilisation

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

5. Charging the battery

- Connect one end of the AC adapter to the mains outlet and the other end to the
DC 9V input of the unit.
- There are 2 LED indicators for the battery on the top of the speaker:
- Indicator (3) lights red when the battery is charging,
- Indicator (4) lights green when the battery is fully charged.
- The battery is fully charged after 4 to 5 hours.
- Unplug the unit first, then the AC adapter from the mains outlet.
Note: The unit can be used while the battery is in charge.
In case of malfunction, please refer to the table below before calling for service.
Problem
No light and no sound
There is light, but no sound
If, after completing the above checks, the problem is not solved, please contact the
appropriate service department. Never try to open the case: if you do, we will not
For any other problems with your device: please contact the After Sales Service.
The warranty does not cover the wear and tear of components of the product, as well
as any problem or damage resulting from:
(1) Surface deterioration due to normal wear and tear of the product;
(2) Damage or deterioration caused by contact of the product with food or liquids,
or due to corrosion caused by rust;
(3) Any unauthorized incident, abuse, misuse, modification, disassembly or repair;
VII – TROUBLESHOOTING
VI – PANNES ET SOLUTIONS
A cable is improperly
connected.
A cable is improperly
connected.
Bluetooth device is not
Volume is on « 0 » or
« Mute ».
take any responsibility.
VIII – WARRANTY
VI – GARANTIE
Causes
active.
Solutions
Check all cables.
Turn off unit, then check all
cables.
Re-do Bluetooth search and
pair.
Check volume or button
position.
40

Publicité

Chapitres

Table des Matières
loading

Table des Matières