Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
VI – OPERATING INSTRUCTIONS
1. Bluetooth
- Turn on the unit, activate the Bluetooth mode by pressing MODE: the word
"BLUETOOTH" starts flashing on the display, and a sound is emitted by the
unit.
- Search and pair the CELED53HP20B4 unit with your external Bluetooth device
(smartphone, PC, etc.).
- When pairing is successful, the word BLUETOOTH stops flashing and a sound is
heard.
Note: The remote can be used to control the speaker commands.
2. USB / SD function
- Insert a USB device or SD memory card containing music into the corresponding
ports (7) or (8).
- Switch to USB or SD mode by pressing MODE (17).
- Playback starts automatically upon insertion.
- Press on
to Play or Pause.
- Use
/
to select a particular track.
- Use VOL+ and VOL- to adjust the volume.
3. AUX-IN function
- Press MODE to activate the LINE mode. The word "LINE" is displayed on the
screen.
- Connect a 3.5mm jack type audio cable (not included) to the AUX port, then
connect the other end to an external audio source (i.e.: MP3 player, PC, tablet...).
- Open the media player of the external audio source, and press the
start (or pause) the playback.
Note: You can use the remote to control the volume or the commands of the
unit and the audio source.
4. Recording
- Connect in the adequate ports a USB device and microphone (supplied) to the
unit.
- Press REC to start recording.
- Press REC again to stop recording.
- With the USB device connected, use the
track.
- To erase a recorded file, press and hold the REC button while playing back the
file.
/
buttons to select a particular
button to
39
Publicité
Chapitres
Table des Matières
