Doro HearPlus 313ci Installation page 8

Connection
1. Connect the curly cord to the handset and to the
socket marked y on the telephone.
2. Connect the telephone line cord to a network
wall socket and to the K socket on the back of
the telephone.
3. Connect the mains adapter to the mains power
wall socket and to the DC 9V socket on the
telephone.
4. Lift the handset and listen for the dial tone.
Batteries
Four AA alkaline batteries are needed for the call
memory and speakerphone in the event of a power
cut. When
batteries. Use only AA alkaline batteries of good
quality (not included).
Note!
Before installing or changing the batteries,
make sure that the telephone is not connected
to the telephone network.
1. Remove the battery cover and insert the batteries
ensuring correct battery polarity is observed.
2. Replace the battery cover and reconnect the
telephone line cord.
Installation
BATT. LOW
English
is displayed, replace all 4
2