Publicité
Les langues disponibles
Les langues disponibles
Wall mounting
The telephone can be wall mounted by using the
included wall mount bracket and two screws (not
included).
Warning!
Make sure that no cables, water pipes or gas pipes
are located inside the wall before drilling into it.
1. Drill two holes in the wall, vertically 83 mm
apart.
2. Insert the screws, allowing them to project
~5 mm out from the wall.
3. Unplug and remove the handset.
4. Fit the guide tabs (A) on the bracket into the
slots (B) on the back of the telephone, then slide
the bracket upwards until it snaps into place.
English
B
A
5
Publicité
