Lionelo Malin Manuel De L'utilisateur page 8

3.
Snap covering fasteners (fig. 6).
4.
Put the mattress into the crib (fig. 7).
5.
To adjust the inclination of the mattress, fasten the buckle on the adjustment
strap and adjust to obtain the desired height.
When taken out of the packaging, the mattress may be curved. It is natural due
to packing method. To straighten it, bend the mattress in the opposite direction
(fig. 18).
Cradle function
1.
To lock the cradle function, pull out the lock lever in the base of the main
part of the crib (fig. 8).
2.
To unlock the cradle function, press the lock lever (fig. 9). Now the crib can
swing to the left and right rhythmically.
How to fold the crib
1.
Take the mattress out of the crib (fig. 7).
2.
Press folding keys on both sides of the crib and lower plastic protection (fig. 10).
3.
Gently press the crib frame on both sides (fig. 11).
4.
Remove legs by pressing the lock key (fig. 12). The crib is now folded (fig. 13).
How to remove the covering
To remove the crib covering, undo fasteners (fig. 6) and zip (fig. 14). Remove
the covering as showed in fig. 15.
Sunshade and mosquito net – applies to MALIN EVO
1.
To install the sunshade, catch plastic holders on the frame and snap the
fastener in the crib covering (fig. 16).
2.
Plastic handles of the sunshade must be put on a specially designated slot
on the frame (fig. 17).
3.
You can put the mosquito net on the sunshade with a zip.
How to clean and maintain
1.
Clean the crib frame with a wet cloth.
2.
You can hand wash the covering at the max. temperature of 30°C.
3.
Regularly clean the crib and check its technical condition.
EN ‑ 8 ‑