Publicité
Les langues disponibles
Les langues disponibles
Before the first Use
Remove the plunge saw and the accessories from the packaging. Check the
saw for transport damage and do not use the saw in case of damages. Keep
the packing materials away from children, risk of suffocation!
Contents of the Package
1x Plunge Saw
1x Parallel Guide
1x MM Blade 24 Teeth
1x Diamond Blade
1x Hex Key 5 mm
1x 22.5 mm Flange (M14)
1x Dust Extraction Hose incl. Adapter
1x Set of Replacement Carbon Brushes
1x User Manual
Intended Use
The plunge saw is intended to cut wood and similar materials, gypsum and
cement-bonded fibre materials and plastics, tile, granite or concrete (diamond
blade).
The plunge saw is only to be used with a specifically designed guide rail.
Installation in a different or homemade guide rail or workbench can cause
serious accidents.
Switching the Plunge Saw ON and OFF
1. Press the ON/OFF switch (2) to switch the plunge saw on.
2. Release the ON/OFF switch (2) to switch the plunge saw off.
3. Pressing the locking switch (1) unlocks the plunge cut mechanism, so that
the motor can be moved downwards. The saw blade emerges from the
protective cover. When lifting the saw the motor slides back up.
Setting the Cutting Depth
The cutting depth can be set between 0 – 42 mm:
1. Loosen the cutting depth limit stop knob (5) and slide it to the desired
cutting depth according to the graduated scale (12) to set the cutting depth.
2. Tighten the cutting depth limit stop knob (5). The motor or respectively the
saw blade can now be pushed down to the set cutting depth.
For a clean, safe cut set the cutting depth in such a way that only max. one
saw blade tooth protrudes under the work piece.
Operation
47
Publicité
