Publicité
ENGLISH
PARTS
1. On/off switch
2. Blade set
3. Taper lever
4. #0—#8 professional grade guide combs
(1.5-25mm)
5. Charging indicator
GETTING STARTED
CHARGING YOUR APPLIANCE
•
Ensure the product is switched off.
•
Connect the shaver to the adapter and then to the mains.
•
The charging indicator will illuminate.
•
The charging indicator will remain illuminated once charge is complete.
•
Run time from fully charged is up to 50 minutes.
•
Charge time from empty is 2 hours.
•
To preserve the life of your batteries, let them run out every 6 months then recharge for
2 hours.
CORDED USE
•
Connect the charging adaptor to the product then to the mains.
•
When the cord is connected to the mains, the charging indicator light will turn off if the
product is turned on.
CAUTION
Extended mains only use will result in the reduction of the battery life.
INSTRUCTIONS FOR USE
Before starting the cut
•
Inspect the clipper making sure that it is free from hair and dirt.
•
Seat the person so that their head is approximately at your eye level.
•
Before cutting, always comb the hair so it is tangle free and dry.
TO ATTACH A COMB
•
Hook front side of attachment comb on front side of teeth.
•
Press back side of comb downwards, until the tab clicks into place.
TO REMOVE THE COMB
•
Press upward on the tab to release the comb.
•
With tab released, pull comb away from clipper and unhook front of the blade.
4
Not shown:
•
Hairdressing cape
•
Scissors
•
Comb
•
Neck brush
•
Sectioning clips
•
Storage case
Publicité
