7LS FA7-1400J Manuel D'instructions page 6

H O W T O U S E
P R I O R T O U S E
• Make sure the unit is fully charged.
• Make sure the attachment is in place.
R E C H A R G I N G T H E D E V I C E
1. Connect the charging cord to the bottom of the unit.
2. Plug the charging cord into the power source.
3. Place unit in cradle.
B AT T E R Y I N D I C AT O R
Low battery: All blue LED lights flash 5 times and the device will beep 5 times before
shutting down (only when the device is in use).
When charging: Blue LED lights appear to indicate the charging status.
Fully charged battery: No lights appear.
C H A N G I N G T H E AT TA C H M E N T
1) Press the release
6
button on the
back of the device
to release the
attachment.
2) Select the
attachment you
would like to use
and place it on
the body of the
device.
CAUTION:
DO NOT change
the attachment
when the power
is on.