Reer HygroTemp Notice D'utilisation page 12

Scope of delivery
See page 3 (Fig. A)
1 x HygroTemp 2in1 digital hygrometer and thermometer with colour
changes
1 x Micro USB cable (USB mains adapter not included)
1 x Operating instructions
Putting into operation
The HygroTemp devicce may be operated with batteries or using the micro USB
connector and included cable.
The unit will automatically switch to battery mode as soon as you disconnect
the USB connector, provided that batteries have been inserted. If no batteries
have been inserted, the unit will switch off.
The USB supply is not for charging batteries. Batteries must be removed from
the unit and recharged using an appropriate charging appliance.
USB operation
See page 3 (Fig. B)
•
Connect the USB cable with the unit and a USB mains adapter to a suitable
power supply. Check whether the details on the rating plate match your
mains voltage.
• Click on the
humidity and temperature display as well as the indicator light all at once.
• Position the device in such a way that the measurement units on the back
of the unit are kept clear and the indoor climate can be optimally measured
and evaluated.
• E.g., avoid placing the unit near heating, at an open window or in direct
sunlight.
Inserting batteries
See page 3 (Fig. C)
Open the battery compartment on the underside of the unit.
Insert the batteries.
Close the battery compartment.
12
button ( ) on the back of the unit. This will activate the air