Samsung TabPro Pen Mode D'emploi page 462

Using the C Pen
• E nsure that there are no obstacles between the C Pen and a connected device, including
human bodies, walls, corners, or fences.
• D o not touch the Bluetooth antenna of a connected device.
• B luetooth uses the same frequency as some industrial, scientific, medical, and low power
products and interference may occur when making connections near these types of
products.
• S ome devices, especially those that are not tested or approved by the Bluetooth SIG, may
be incompatible with your C Pen.
• D o not use the Bluetooth feature for illegal purposes (for example, pirating copies of files
or illegally tapping communications for commercial purposes).
Using the C Pen
Various features, such as performing touch actions, writing on a connected device's screen,
or launching apps, are available when the C Pen is connected to another device. The line
thickness will change depending on how hard you press the nib against the screen.
If you apply excessive pressure to the pen nib or use the pen on a rough surface, the
pen nib may be damaged.
The C Pen does not have a power on/off function. If the C Pen is not used for
approximately ten minutes, it will enter sleep mode and the C Pen and the mobile
device will be disconnected. To connect the devices again, press the Up button or the
Down button.
Installing the TabPro Pen Manager app
Install the TabPro Pen Manager app on the connected Galaxy TabPro S to use convenience
features, such as checking the C Pen's connection status and remaining battery level.
1
Launch the Samsung Update app on the connected Galaxy TabPro S.
2
Select the TabPro Pen Manager app and tap the Install button.
English (USA)
11
9