Geberit AquaClean Mode D'emploi page 18

EN
The wall-mounted control panel is without function
The following table will help you with troubleshooting if the shower toilet cannot be operated
using the wall-mounted control panel.
The shower toilet can also be operated using the side control panel.
Step Description of problem
1 The batteries are almost flat.
The LED display flashes.
2 The batteries were replaced.
The user interface of the wall-mounted
control panel remains inactive when
touched.
3 Pairing has failed.
The user interface remains inactive
when touched.
The LED display flashes twice, followed
by a short break.
18
Fault clearance
Replace batteries (type CR2032).
Re-assign wall-mounted control panel.
See "Assign the wall-mounted control
panel (pairing)".
Re-assign wall-mounted control panel.
See "Assign the wall-mounted control
panel (pairing)".
B1290-001 © 04-2016
967.163.00.0 (01)