Installation
Installation
NOTICE! Avoid cleaners containing organic
solvents, alcohols, and hydrocarbons.
Rinse with water after cleaning.
Supplies Required:
• (3) ³⁄₈" wall fasteners and bolts
• Pipe sealant
• Piping to ½" IPS water supply inlet on unit
• Piping to 1¼" IPS drain outlet
• Sign-mounting hardware
Step 1: Install inlet drain fitting
The top of the eyewash heads should be
33"–45" (838mm–1143mm) from the floor.
1. Position the inlet drain fitting over the 1¼" drain
outlet pipe from wall.
2. Using the inlet drain fitting as a template, mark
the bolt hole locations on the wall OR install three
suitable fasteners (supplied by installer) for ³⁄₈"
bolts in the wall at the marked hole locations (see
Figure 1).
3. Bolt the inlet drain fitting to the wall or wall
fasteners using ³⁄₈" bolts (supplied by installer).
Step 2: Assemble eye/face wash
1. Assemble eyewash components as shown in
Figure 2a on page 4 or Figure 2b on page 5.
• Apply pipe sealant (supplied by installer) to
all male-threaded pipe joints.
• Use the rubber grip pad provided or a strap
wrench around pipes when tightening to
prevent marring the Bradtect
safety yellow coating. Place the grip pad on
the pipe, then put the wrench over the grip
pad and turn the pipe with the wrench.
Step 3: Connect water supply
1. Connect the water supply piping (supplied by
installer) to the ½" IPS inlet on the eye/face wash.
2. Connect the tailpiece to the 1¼" IPS drain outlet
on the eyewash.
3. Mount the safety sign to the wall using sign-
mounting hardware (supplied by installer).
4. Open the water supply lines. Test for leaks and
adequate water flow.
Bradley • 215-158FW Rev. K; ECN 12-05-003C
13¼"
(337mm)
(346mm)
®
protective,
S19-220FW
Wall
Ø 10" (254mm)
15½" (394mm)
8¹⁄₈"
(206mm)
2¼"
(57mm)
Ø ³⁄₈"
7½"
(9mm)
5¼"
(191mm)
(133mm)
S19-220T
Wall
13⁵⁄₈"
Ø 10¾" 273mm)
15⁷⁄₈" (403mm)
8¹⁄₈"
(206mm)
2¼"
(57mm)
Ø ³⁄₈"
7½"
(9mmmm)
5¼"
(191mm)
(133mm)
10/18/2012
S19-220FW, S19-220T
4½"
(114mm)
8¼"
(210mm)
4"
(102mm)
36" (914mm)
Suggested
Height to
Floor
29½"
(749mm)
Suggested
Height to
Floor
4½"
(114mm)
8¼"
(210mm)
4"
(102mm)
36" (914mm)
Suggested
Height to
Floor
29½"
(749mm)
Suggested
Height to
Floor
3