Dimensions; General Specifications; Important Notes - Roca EMOTION Manuel D'installation Et D'utilisation

GB
Congratulations on your decision to purchase the
EMOTION bathtub.
This handbook contains the instructions required for correct
installation.
In accordance with current regulations, installation is to be ar-
ranged by an authorised fitter.
BREACH OF THIS CONDITION RENDERS THE WARRANTY
NULL AND VOID.
The bathtubs included in this manual are Type 1 according to the
EN-198 standard.

1. DIMENSIONS

Fig. 1
650
883
122.5

2. GENERAL SPECIFICATIONS

Weight of the bathtub: 79 kg
Capacity: 390 l.
Mains voltage
(if you purchase the lighting kit)
230 V ; 50 Hz~60 Hz
-Rated power / Rated current: 72 W/0, 33A
-Equipotential socket
Lighting kit light (only if purchased separately)
- Voltage: 230 V
- Power (per lamp): 36 W
- Protection: IP X 7
70
427
900
1555
1800
2342
:
122.5
1055 1300

3. IMPORTANT NOTES

It is important to take the following points into account while fit-
ting the bathtub:
- Protect the surface of the bathtub until it is completely fitted. We
recommend covering it with the supplied plastic cover and the
packaging cardboard or a piece of thick, smooth fabric.
- If you use a blowtorch for fitting, do not point the flame at the
bathtub.
- Scratches can be removed from shiny bathtubs using Wet &
Dry sandpaper (800 grit) and polishing it with a slightly abrasive
solvent-free polish, such as the polishes used for car paint.
10
439
*
566
127