Landing Skid Assembly; Propeller Assembly - XciteRC Dragon250 Mode D'emploi

Landing skid assembly

EN
Place the landing skid on the designated posi-
tions as shown in the picture.
Place the antenna cable accurately in the reces-
ses of the landing gear as shown in the picture.

Propeller assembly

M2
orange rotor
black rotor
M3
20
Lock the landing gear with 2 of the accompa-
nying screws.
Lock the landing gear with 2 of the accompa-
nying screws.
WARNING: do not pinch or bend the an-
tenna, it must placed in the recesses without
tension – crash hazard!
M1
orange rotor
black rotor
M4
Assembly
XciteRC Dragon 250