Changing The Cartridge - IONIQ Skincare IONIQ ONE Mode D'emploi

English

Changing the cartridge

Always switch off the appliance first and only then remove the cartridge
so that the residual liquid from the appliance is pumped back into the
cartridge. If this is not done, the sprayer will vibrate constantly as a
warning. The residual liquid in the sprayer is automatically pumped
out after 2 minutes. This leads to contamination of the newly inserted
cartridge or the environment. Contaminated cartridges can no longer be
used! Reinsert the removed cartridge immediately and switch off the
sprayer before changing the cartridge again.
a
Switch off the appliance and remove the
cartridge.
Always close the cartridge with the lid when it is not mounted in the
sprayer. This, for example, prevents liquid from leaking out during
transport.
Twice a week and when changing from the tanning cartridge to another care product or
before/after a longer period of non-use, the sprayer and the nozzle field should be cleaned
as described in the chapter „Cleaning and care" to remove all residues.
12
b
a
Screw in the new cartridge until you
feel it click into place and switch the
appliance on again.
b