Publicité
Les langues disponibles
Les langues disponibles
Note: Support arms (A) can be extended by loosening two phillips screws under each arm as shown in figure 5.1.
5
Extend arm to desired position and retighten screws before placing component onto mount.
Place component (DVD player, amplifier, etc.) onto support arms (A) of mount.
WARNING
• Always use an assistant or mechanical lifting equip-
ment to safely lift and position items onto support arms.
fig 5.1
PHILLIPS SCREWS
Installation of Safety Belt
Wrap safety belt (F) around component as shown in figure 6.1. Position belt close to the back of the component being
6
secured (in line with the back feet) as shown in figure 6.2.
Insert loose end of safety belt into the buckle end as shown in figure 6.3. Pull to tighten securely.
fig 6.1
A
F
fig 6.3
fig 5.2
A
fig 6.2
SAFETY BELT
DVD PLAYER,
AMPLIFIER, ETC.
SAFETY BELT
Publicité
