Publicité
Les langues disponibles
Les langues disponibles
Installation of Support Arms
Hook support arms (A) onto wall plate (B) using hooks on support arms as shown in figure 3.1. Hooks of vertical
3
brackets (A) must be engaged securely into wall plate as shown in detail 1.
Note: Thumb screws located underneath the support arms (A) can be turned for fine tuning level adjustment of the
mount as shown in figure 3.2.
A
fig 3.1
DETAIL 1
Attach wall plate cover (C) to wall plate (B) as shown in figure 4.1. Tabs on the back of cover (C) are placed into
4
notches in the back of wall plate (B) as shown in figure 4.2.
fig 4.1
B
B
A
C
B
fig 3.2
fig 4.2
C
B
(BACK OF WALL PLATE)
WALL NOT SHOWN FOR CLARITY
THUMB
SCREWS
TAB
Publicité
