Publicité
Les langues disponibles
Les langues disponibles
If you want to use a wheel stopper set on the other wheel holder of the bike
carrier, it must be assembled accordingly. I.e. the wheel stoppers must be
assembled so that the strap buckle is positioned in between the two wheel
holders.
THE USE
Press the unlocking lever (1) upwards. Now you can pull the tensioning belt
from the buckle.
Place the bicycle on the bike carrier and mount it with the frame holder using
the instructions of your bike carrier.
Push the wheel stopper up to the bicycle wheel and tighten the wing nuts.
CAUTION: The wheel stoppers must always be located between the wheels of the
bicycle, never in front or behind.
Place the tensioning belt around the rim of the bicycle and insert the tensioning
belt into the buckle (2).
Position the rim protector so that the tensioning belt is unable to damage the
rim as a result of friction during transport.
The tensioning belt is tightened by pulling the buckle (3) up several times.
Repeat this for the other wheel.
8
Publicité
