Instructions To Order Spare Parts And To Request Warranties; Instructions To Order Spare Parts; Instructions To Request Warranties; Recomendations Of Use - ENAR SPYDER MB32 Manuel D'instructions

6. INSTRUCTIONS TO ORDER SPARE PARTS AND TO REQUEST
WARRANTIES
6.1

INSTRUCTIONS TO ORDER SPARE PARTS

1. All spare parts request must include PART CODE NUMBER AS STATED IN THE PART LIST.
We recommend to include ITEM´S MANUFACTURE NUMBER.
2. The identification plate with manufacture and model number is located in the top part of the motors'
plastic frame. The transmission and pokers have the manufacture number engraved outside.
3. Let us to know the correct shipping instructions, including the wished route and the address and
consignee's complete name.
4. Do not return the parts without authorisation, the return are done freight prepaid.
6.2

INSTRUCTIONS TO REQUEST WARRANTIES

1. The warranty is valid 1 year after the purchasing of the machine, The warranty will cover parts with
manufactures' defects. In no case the warranty will cover a malfunction due to improper usage of the
equipment. Labour and shipping fees will always be paid by the customer.
2. In all warranty requests
AUTHORIZED SHOP, always including the complete address and name of the consignee.
3. The Technical Assistance Service will immediately notify you if it accepts the warranty and if
requested, it will send a technical report.
4. The warranty will be void if any equipment has been previously handled by personnel outside of
ENARCO, S.A. or not authorised by it.
7

RECOMENDATIONS OF USE

1. choose the type of vibrator adequate to the dimensions of the structure to vibrate, the distance
among the reinforcement and the slump cone. It is recommendable to have an additional concrete
vibrator.
2. Before starting check that the concrete vibrator is in good use and it works correctly. Use the means
of safety and protection.
3. Pour the concrete in the structure avoiding high heights. Try to pour levelled the concrete. The
thickness of every layer should be less than 50 cm, it is recommendable between 30 and 50 cm.
4. Introduce the vibrator vertically in the concrete mass without moving it horizontally. Do not use the
vibrator to push the concrete horizontally. The concrete vibrator should be introduced into the mass
at regular intervals. The interval should be from 8 to 10 times the diameter of the poker. See the
concrete in the process of vibrating to determine the field of action of the vibrator. This field should
be overlapped to avoid areas without vibrating. To obtain an optimum compacting of the concrete,
plunge it 10 cm into the precedent layer to assure a good adherence. The time in vibrating the
different layers should not be big to avoid cold joints. Do not push or force the vibrator into the mass,
it could be stuck in the reinforcements.
5. The time of vibration in each point depends on the type of the concrete, the size of the vibrator and
other factors. This time can be from 5 to 15 seconds after the immersion in each point. The time is
shorter for a fluid mass, a vibration in excess can produce segregation. It is considered the concrete
to be well vibrated when the surface around the poker is shiny and compact and there is no more air

FRECUENCY CONVERTER AND POKERS

AUTEK MAQUINARIA 5392 7077
THE MACHINE MUST BE SENT TO ENARCO, S.A. or to an
AUTEK MAQUINARIA 5392 7077
MB32, MB52, MB62, MB72, MB31, MB51, MB61
en
SPYDER
9