Vibration And Noise Reduction; Behaviour In Emergency Situations; Residual Risks - Parkside Performance PSSAP 20-Li B2 Instructions D'utilisation Et Consignes De Sécurité

˜ Vibration and noise reduction
To reduce the impact of noise and vibration
emission, limit the time of operation, use low-
vibration and low-noise operating modes as well
as wear personal protective equipment .
Take the following points into account to minimise
the vibration and noise exposure risks:
Only use the product as intended by its
¾
design and these instructions .
Ensure that the product is in good condition
¾
and well maintained .
Use correct accessory tools for the product
¾
and ensure they are in good condition .
Keep tight grip on the handles / grip surface .
¾
Maintain this product in accordance with
¾
these instructions and keep it well lubricated
(where appropriate) .
Plan your work schedule to spread any high
¾
vibration tool use across a longer period of
time .
˜ Behaviour in emergency
situations
Familiarise yourself with the use of this product by
means of this instruction manual . Memorise the
safety warnings and follow them to the letter . This
will help to prevent risks and hazards .
Always be alert when using this product,
¾
so that you can recognise and handle risks
early . Fast intervention can prevent serious
injury and damage to property .
Switch the product off and disconnect it from
¾
the mains if there are malfunctions . Have the
product checked by a qualified professional
and repaired, if necessary, before you
operate it again .
˜ Residual risks
Even if you are operating this product in
accordance with all the safety requirements,
potential risks of injury and damage remain . The
following dangers can arise in connection with the
structure and design of this product:
Health defects resulting from vibration
¾
emission if the product is being used over
long periods of time or not adequately
managed and properly maintained .
Injuries and damage to property due to
¾
broken accessory tools or the sudden impact
of hidden objects during use .
Danger of injury and property damage
¾
caused by flying objects .
NOTE
This product produces an electromagnetic
u
field during operation! This field may
under some circumstances interfere with
active or passive medical implants! To
reduce the risk of serious or fatal injury, we
recommend persons with medical implants
to consult their doctor and the medical
implant manufacturer before operating this
product!
GB/IE 33