must be placed and installed in a way that they are not trapped by
sliding seat or vehicle door under normal conditions of use.
3.
All belts which secure the car seat must be tight and adapted to
child's body. The belts must not be twisted.
4.
All hip belts must go low so that the child's pelvis is held properly.
5.
The product must be replaced if it has been exposed to overloads
in case of accident.
6.
Do not make any modifications or supplementation to the product.
Please strictly follow the operating manual.
7.
Make sure the product is not exposed to direct sunlight. It may
cause the product to heat up and, in effect, burn the child's skin.
8.
Do not leave the child in the car seat unattended.
9.
Luggage and other items which may cause bodily injuries in case of
car collision must be properly secured.
10. Do not use the child safety seat without its fabric cover. Do not replace
the cover with other than recommended by the manufacturer. The
cover is an integral part of the car seat.
11. Buckle correctly and properly. In case of emergency, proper
protection of buckles lets you take the child out of the car seat easily.
12. Before you install the car seat, please read the vehicle manual too.
PRODUCT OUTLINE
1.
Adjustable headrest
2.
Headrest adjustment
3.
Shoulder belt guide
4.
Hip belt guide
5.
Car seat base
6.
Inclination adjustment lever
7.
ISOFIX arms
8.
ISOFIX release key
9.
ISOFIX control light
10. ISOFIX fastening spots
EN
(fig. 1)
‑ 6 ‑