Télécharger Imprimer la page

Orbegozo HOT 710 Manuel D'instructions page 16

Publicité

Les langues disponibles

Les langues disponibles

HOT 710
4. Place the dressed poultry or the piece of roast meat carefully on to the revolving spit. Push the fixing
clips on to the revolving spit and use them to fix the roast meat in place.
5. Lift the spit by the handle and place it in the oven. First insert the open end on the drive mechanism on
the right-hand side of the oven. Then suspend the other end into the corresponding device on the left.
6. Turn the function switch to grilling with revolving spit. Select a temperature and cooking time. The
revolving spit begins to turn. Please ensure that the piece of roast meat can turn freely.
7. After the set time has expired, a sound is heard and the device switches off automatically. When the
meat is completely cooked, remove the spit by the handle. Caution, this is very hot!
8. Turn off the oven: turn down the timer and temperature and turn the function switch to "0". Do not
carry out any cleaning until the device has cooled down completely.
MAINTENANCE AND CLEANING
Before conducting any maintenance and repair procedures, be sure that the plug is out of the socket
-
and the oven is cooled down.
After operation, wipe all parts by using warm soapsuds or liquid detergent and rinse.
-
Never use dry and powder cleaners.
-
Never wash your oven in the sink or under flowing water.
-
Do not clean painted parts by using mechanic cleaning liquids and chemical agents.
-
INFORMATION ABOUT HOW TO TRANSPORT THE OVEN
Disconnect the appliance before moving it. Handle it with care.
Cover the tray and grill in order to protect them during the transfer. In order to move the oven, use its own
packing.
Attention: The first time you use the oven, some smell and smoke may come out.
Disposal of old electrical appliances.
The European directive 2002/96/EC on Waste Electrical and Electronic Equipment (WEEE), requires that
old household electrical appliances must not be disposed of in the normal unsorted municipal waste
stream. Old appliances must be collected separately in order to optimize the recovery and recycling of
the materials they contain, and reduce the impact on human health and the environment. The crossed
out "wheeled bin" symbol on the product reminds you of your obligation, that when you dispose of the
appliance, it must be separately collected. Consumers should contact their local authority or retailer for
information concerning the correct disposal of their old appliance.
DECLARATION OF CONFORMITY: This device complies with the requirements of the Low Voltage
Directive 2014/35/EU and the requirements of the EMC directive 2014/30/EU.
16

Publicité

loading