Accessories; Maintenance / Cleaning; Troubleshooting And Service - hawa Powerman 2684-7100-01-01 Mode D'emploi

Operating instructions Powerman

7. Accessories

Round punch tools
for hydraulic pump; Max. size ø 4.72"
Replacement bolts
for hydraulic pump
for round punch tools
Description
Replacement bolt für standard Round Punches
Attention: Replacement bolt for Round Punches
Plus, sizes 18.6 - 25.5
Reduction piece 2624-0716-10-01
Spacer sleeve set 2684-7336-01-00
Suitable round, square, rectangular and shaped punches can be found on our webside www.haewa.de
Round, square, rectangular and shaped punches in other dimensions or versions to samples or drawings are available upon request.

8. Maintenance / cleaning

• The Powerman mostly works maintenance-free
• At regular intervals the unit should be cleaned, and zinc-plated parts should be lubricated
• Visual and functional inspection of the equipment should be performed weekly
• Oily rugs and hydraulic oil have to be treated as hazardous waste

9. Troubleshooting and service

If you experience a break-down of the equipment please contact your local sales office or the manufacturer. Here you will receive help and hints to do
smaller repair work yourself. If a complex repair is necessary, this must be performed by our factory-service, as häwa will not assume any liability for
improper repairs and resulting consequential damages.
Service Hotline:
Tel: 770 9213272
Fax: 770 9212896
E-Mail: haewa@haewacorp.com
8
ø in cylinder ø in tool
mm/inch mm/inch
9,5 / 3/8" 9,5 / 3/8"
19 / 3/4" 19 / 3/4"
19 / 3/4" 11,1 / 7/16"
Length Order No.
mm/inch
72 / 2,83" 2683-0710-00-00
135 / 5,31" 2683-0719-00-00
100 / 3,94" 2624-0711-19-00