Black & Decker BD 1000i Traduction Des Instructions Originales page 12

8.5 Storage
1. Empty the petrol tank using a petrol
suction pump.
Important: Do not empty the petrol tank in
enclosed areas, near fire or when smoking.
Petrol fumes can cause explosions and fire.
2. Start the engine and run it until the tank
and fuel line are completely empty and the
engine stalls.
3. Let the generator cool down.
4. Remove the spark plug and pour approx.
5. Pull the starter handle slowly several
times to
coat the internal parts.
6. Screw the spark plug back in.
7. Store the generator in a well-ventilated,
safe place.
8.6 Transport
1. Wait until the generator has cooled down.
2. Always transport the generator in the
upright position.
9. Disposal and recycling
The generator is supplied in
packaging to prevent its being
damaged in transit. This packaging
is raw material and can therefore
be reused or can be returned to the
raw material system.
The generator and its accessories are made
of various types of material, such as metal
and plastic. Defective components must be
disposed of as special waste. Ask your dealer
or your local council.
12