Publicité
Les langues disponibles
Les langues disponibles
How to use the hood
Push the insert pieces for the hood joints into the corre-
sponding openings on the armrest or on the carry-cot.
Attention: You must secure the press studs on the back
end of the cover onto the rear of the backrest as the cov-
er is also used as a protection against falling out.
If you need to remove the hood, undo the press studs on
the rear of the backrest; press the release buttons on the
insert pieces of the hood joints and pull the joints out of
the openings. You can open the zip at the top of the hood
for ventilation.
Adjusting the Backrest
Adjusting the Footrest
Lift the footrest and engage the bar in the required strut.
Caution: There is a red safety hook at the footrest. When
the footrest is horizontal this hook must be pushed onto
the adjusting bar.
Using the 5-point harness
You can position the shoulder harnesses at 3 levels.
Always use the position closest to the shoulder level of
your child. To open the harness press the central button
on the buckle. To adjust the shoulder/ weist harness pull
the free ends of the strap.
Pull the grip 1 upwards and
move the backrest 2 into the
required
position.
make sure that the backrest
re-engages properly.
Adjusting the restraints
Shoulder restraints
Waist restraints
Crotch restraints
Please
Safety bar
Push the insert pieces on the safety bar through the
slots in the seat cover into the receptacles beneath,
which are located in the armrests. Make sure that the
safety bar has clicked into place on both sides. To re-
move it, press the release buttons on the insert pieces.
In order to make it easier for your child to get in and out,
it suffices to release and fold up one side of the bar.
ÉLÉGANCE
tighten
loosen
INT
11
Publicité
