Controls - NEC MultiSync LCD1770V Mode D'emploi

Controls

OSM (On-Screen Manager) control buttons on the front of the monitor function
®
as follows:
To access OSM menu, press any of the control buttons (
To change signal input, press the SELECT button (NX and NXM only) .
NOTE: OSM must be closed in order to change signal input.
Button Menu
Exits the OSM controls.
MENU/EXIT
Exits to the OSM main menu.
Moves the highlighted area left/right to select control menus.
Left/Right
Moves the bar left/right to increase or decrease the adjustment.
Moves the highlighted area down/up to select one of the controls.
Down/Up
Active Auto Adjust function. Enter the OSM sub menu.
SELECT
Resets the highlighted control menu to the factory setting.
RESET
NOTE: When RESET is pressed in the main and sub-menu, a warning window will appear
allowing you to cancel the RESET function by pressing the MENU/EXIT button.
Brightness/Contrast Controls
BRIGHTNESS
Adjusts the overall image and background screen brightness.
CONTRAST
Adjusts the image brightness in relation to the background.
AUTO Contrast (Analog input only)
Adjusts the image displayed to optimal settings.
Auto Adjust
Automatically adjusts the Image Position, H. Size and Fine settings.
Image Controls
LEFT / RIGHT
Controls Horizontal Image Position within the display area of the LCD.
DOWN / UP
Controls Vertical Image Position within the display area of the LCD.
H.SIZE
Adjusts the horizontal size by increasing or decreasing this setting.
FINE
Improves focus, clarity and image stability by increasing or decreasing this setting.
AccuColor
®
Control Systems: Six color presets select the desired color setting (sRGB
AccuColor ®
and NATIVE color presets are standard and cannot be changed).
R,G,B: Increases or decreases Red, Green or Blue color depending upon which is
selected. The change in color will appear on screen and the direction (increase or
decrease) will be shown by the bars.
LCD17PISAManual080604.p65
(Analog input only)
(Analog input only)
Control Systems
10
10
Left, Right, Down, Up).
MENU/EXIT,
8/6/04, 5:15 PM