eufy Security Video Doorbell 2K Guide Rapide page 8

STEP 5 RUNNING WIRES THROUGH THE
WALL
Run Wires through the Wall
1. Unplug the power adapter before running wires.
2. Unscrew the terminals on the back of the doorbell to detach the power cord.
11 English
3. Slip down the grommet over the adapter wires.
4. Run the power cord through the hole and carefully extend them outside.
• Make sure you have a qualified electrician run the wires if you are not comfortable
with dealing with wires.
• Use the rubber plug or glue to fill the drill holes.
• Use the provided grommet to hold the wires into place. Make sure the wires are
tucked neatly.
English 12